StompShield for Morningstar MC6 Pro
StompShield for Morningstar MC6 Pro
Your MC6 Pro sits at the front of your board, right where boots, dropped mic stands, and spilled drinks land. The StompShield is a laser-cut acrylic cover that guards the controller without sitting on it. It mounts on hook-and-loop fasteners and rubber bumpers, so the cover stays lifted off the surface and nothing grinds against your displays or finish.
Why a standoff design matters
Many covers use magnets that pull the acrylic flat against the unit. That seems secure, but dirt, grit, and moisture get trapped between the cover and the surface. Every stomp then grinds that debris into your finish and screens. The StompShield rests on its mounts and never on your gear. There is no contact with the surface, so nothing gets ground into it.
Features
- Stays off your unit. Hook-and-loop fasteners secure the cover to the board, and rubber bumpers support it across its full span. The cover holds firm without contacting the MC6 Pro.
- Solid support underfoot. Bumpers are placed throughout the cover to spread the load, so it stays stable when you step on it.
- 1/8" cast acrylic. It's rigid, crystal clear, and lighter than thicker alternatives. Cast acrylic is stronger and more scratch-resistant than cheaper extruded sheet.
- Displays stay readable. The clear acrylic sits over all three color displays, so your preset names, colors, and icons stay visible mid-set.
- Use it only when you need it. The cover lifts off by the hook-and-loop fasteners, so you can leave it off for programming and put it on before the show.
- Precision laser-cut. It's cut to the exact layout of the MC6 Pro, so all six footswitches and the displays line up.
Specs
- Material: 1/8" (3mm) cast acrylic
- Mounting: hook-and-loop fasteners with rubber standoff bumpers
- Fits: Morningstar MC6 Pro
What's in the box
StompShield cover, hook-and-loop fasteners, rubber bumpers, and installation instructions.
StompProof is not affiliated with or endorsed by Morningstar Engineering. MC6 Pro is a trademark of Morningstar Engineering.